News-ultrasonic cleaner supplier and manufacturer | whale cleen

Ultrasonic cleaning technology is a new cleaning technique based on the explosive force of micro-bubbles generated by high-frequency ultrasonic waves in the cleaning solution. Compared to traditional cleaning methods, ultrasonic cleaning technology has hi

In addition to the use of ultrasonic cleaning machine needs to follow a certain method and attention, the following small series for everyone to share.        1. Installation of ultrasonic cleaning machine for oil removal    Generally speaking, the power 

When using an ultrasonic cleaning machine, will produce not high low noise, some people can accept, but some people are difficult to accept, because harsh and uncomfortable, then, why would produce noise? Can the noise of the ultrasonic cleaning machine b

PCB is widely used in China. There are some contaminants including flux and adhesive in PCB manufacture. There are other pollutants produced in the manufacturing process, such as dust and debris. If the surface of PCB is not clean, resistance and leakage 

In the machinery manufacturing and heavy equipment maintenance sectors, few maintenance tasks are as persistently frustrating as cleaning gears and bearings. These precision components—the “skeleton and joints” of mechanical transmission systems—are routi

Look at the two PCBs.    The first was cleaned with a manual brush and solvent dip. The second came from a fully automated ultrasonic cleaning line. To the naked eye, they look identical—solder joints shining, surfaces spotless, ready for assembly. But un

In metal parts manufacturing, few processes carry as many hidden costs—and as many risks—as strong acid soaking for degreasing and rust removal. For decades, countless factories have relied on aggressive acid baths to strip oil, grease, and oxidation from

In semiconductor manufacturing, a single microscopic particle clinging to a silicon wafer surface can turn a high-value chip into scrap. As device geometries continue to shrink toward single-digit nanometer nodes, the tolerance for contamination has becom

In vacuum coating processes such as PVD (Physical Vapor Deposition) and CVD (Chemical Vapor Deposition), the quality of the final coating is directly determined by the cleanliness of the substrate. A single speck of oil, a microscopic particle, or a resid

Walk into many manufacturing facilities, and you'll still see the same scene: a worker in rubber gloves, safety goggles, and a chemical-resistant apron, standing over an open tank of solvent. They're scrubbing parts with brushes, spraying with hig

For decades, industrial cleaning was viewed as a necessary but straightforward step—a single tank of solvent, some ultrasonic waves, and a rinse. But as manufacturing tolerances have tightened and component complexity has increased, the question has shift

In the world of precision cleaning, ultrasonic cleaners have earned a reputation as powerful tools. A common question from potential users is:"Is it truly fast, and why?"The answer is a resounding yes, but its impressive speed is not magic—it